configs/releng/efiboot/loader/loader.conf:
The 'default' bootloader selection of systemd-boot is based on a glob
pattern. The previous pattern was not sufficient to select anything,
which is why it is now made explicit (pointing to archiso-x86_64.conf).
configs/releng/build.sh:
Instead of downloading UDK2018 based edk2 UEFI shell, use the Shell
binaries from the edk2-shell package.
This effectively makes the use of EFI shell v1 obsolete.
configs/releng/efiboot/loader/entries/uefi-shell-v*:
Renaming UEFI shell entries to match the packaged edk2-shell based UEFI
shell binaries.
configs/releng/build.sh:
Renaming the systemd-boot bootloader entries for UEFI shell (normal and
full version) to reflect their file names, which are derived from the
binary names in the edk2-shell package.
Copying the edk2-shell based UEFI shell binaries for normal efiboot and
.iso based "el-torito" efiboot mode.
docs/README.build:
Adding edk2-shell to the requirements in the documentation, as the
package is now used to provide UEFI shell.
configs/releng/packages.x86_64:
As the refind-efi package has been renamed to refind, the package
required for the releng image needs to be renamed as well.
The package linux-firmware has a new split package amd-ucode. Do not
build the image manually but use the package.
Signed-off-by: Christian Hesse <mail@eworm.de>
extract `uname -r` from the contents of vmlinuz-linux rather than make
assumptions about the kernel EXTRAVERSION.
This is trivially customizable by changing the chosen kernel image.
Fixes FS#59496
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Only avoid build i686. The syslinux config files for i686 are still
present. This implies that a i686 entry will be present but not working.
In another patch, this can be removed if desired.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
We reached the upper limit again [#1], increasing sufficiently
to do not touch again in long time.
[#1] 526be1579e
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
Current build leaves ~800K free of 31M in the FAT filesystem, adding 9M.
Going beyond 65535 sectors of 512-byte is a bit special,
but works for EFI. Image size is reported a zero in boot catalog,
but xorriso does a good job, and writes right value in hybrid-partition.
Tested booting in qemu in both modes (cd-rom and hybrid) and works fine.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
A new option -g <keyid> is added to build.sh set the key id. If it is set, the squashfs files will be signed
by gpg and the gpg key will be added to archiso.img. In order to use this option, a gpg agent must be running.
Since build.sh is executed as root, it may be necessary to set the GNUPGHOME environment variable, for
example
$ su -c "GNUPGHOME=/home/youruser/.gnupg /path/to/build.sh -g yourkeyid"
I see cases where a stale loop device stays around and fills up my
partition as image file is still in use and does not get unlinked.
Explicitly detach loop device on umount to fix that.
Signed-off-by: Christian Hesse <mail@eworm.de>
This makes systemd generate a machine-id on early boot and prevents it from thinking we need
any "first boot" setup. We really don't want systemd thinking that, since we carefully prepared
our root file system.
This also ensures every live environment has a unique machine id.
Ucode updates correct problems with the processor. Without this (or a firmware update),
some machines fail to work in a stable manner. Make sure that the installation is smooth
by providing the ucode on the live system.
(While we're at it, sort packages.both alphabetically.)
Tested only under QEMU using OVMF SecureBoot enabled firmware plus lockdown-ms.
Both loader.efi (gummiboot) and vmlinuz.efi should be hashed before boot in secure mode.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
The new mirror= option takes a mirror URL and creates a new mirrorlist.
When setting mirror=auto, the mirror is taken from archiso_http_srv in
order to keep using the mirror selected in the netboot menu.
* Remove the unattended-keyring-init patch as this was applied by upstream with pacamn 4.1
* Update our pacman.conf following the new upstream default
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* This scripts, now runs only in x86_64.
* build.sh does not require arguments to run (no more build, clean, purge).
* /usr/share split is not done anymore: there are some differences between two arches. (ISO size +60MiB)
* /usr/lib/modules split is not done anymore: this was never enabled officially in aitab.
Tested and works fine. Maybe some small cosmetic changes needed.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Simplify code path.
Previously in "dual" mode is executed when arch=i686, i686 was used as primary source.
This does not change current behaviour of building "dual" on x86_64.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Using a separate shell script to customize live-enviroment,
makes much more readable code.
Move all thing except:
* Need network access (name resolving).
* Need access to some file outside chroot.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Leave the work to the [nss-myhostname] package that is now in {base}
and is configured by default in [filesystem] (/etc/nsswitch.conf).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* pacman-init already pulls in services it depends on
* the multi-user.target is the default
* do not rename the getty service so tools like systemd-delta still work
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
A live system should never alter the host system in any way. This includes setting the bios clock.
E.g. if the user runs his system in local time we would do the wrong thing here.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
* Increase size to a safe 31M, (currently we have 400K free since latest changes)
* Also set a filesystem label, can be useful for future usage...
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This installs zsh and sets it as default for root and the arch user.
grml-zsh-config is installed as a userfriendly default configuration.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
* add the network daemon to rc.conf
* configure dhcpd to background immediatly so we don't timeout if network is not up yet
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
* We use a rc.conf file loser to the upstream default.
* Use the recommend config files to setup hostname, locale, timezone and console
EDIT (Gerardo): Add empty FONT= and use ln -f for localtime
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Download and add the current installation guide as plain text.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This was made originally using directly pacman-key file,
convert it in a patch form, to be more easy to track it.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Although everything should be fine now (due to the /lib -> /usr/lib symlink),
adjust everything to the proper path.
Edited (Gerardo): Also rename function name and image name to be consisten.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Adding branding here is not worth the effort. We should keep the archiso environment as vanilla as possible.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
The old autologin method doesn't work anymore with recent login from util-linux.
Utilize agetty -a instead.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This will allow users to install packages within the live environment.
We use the haveged daemon to increase entropy from CPU timings.
See http://www.issihosts.com/haveged/ for details.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This ensures we do not pick up any testing or third party repos from the host.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Download and add package signatures to the repository database
* Support any number of configured package caches
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
