Add two parameters:
img_dev=/dev/sdNM
where /dev/sdNM is the device where .iso is located.
img_loop=/path/to/arch.iso
where /path/to/arch.iso is the full path of the .iso in the device img_dev.
Original idea from Baurzhan Muftakhidinov.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This is how ISO will look now:
/syslinux only syslinux related files (syslinux.cfg, *.c32, etc)
/arch/ isomounts + *.sqfs images
/arch/boot/ Linux + initramfs + Memtest86+ + other files for early boot stage
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
syslinux's KERNEL command tries to autodetect the type of the kernel
by looking at the file's extension. This is unsafe, use the explicit
versions instead:
LINUX - for Linux kernels (memtest is booted like a Linux kernel, too)
COM32 - for COM32 modules
COMBOOT - for comboot modules (only poweroff.com right now)
See http://syslinux.zytor.com/wiki/index.php/SYSLINUX#KERNEL_file
Some modern HDD come with agressive APM settings by default,
not only "green ready" drive also "high end" drives.
Adding hdparm so users can change/disable hdd settings (mostly -B -S -M).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
The name of the bootloader is syslinux, while isolinux is just one
of many components. isolinux.bin now also accepts syslinux.cfg
as a configuration file name (as do all other loaders).
Thus, rename the isolinux/ folder to syslinux/, and rename
isolinux.cfg to syslinux.cfg. The only occurrence of 'isolinux'
is now the actual loader file 'isolinux.bin'. This makes
the transition from isolinux to the other syslinux loaders
easier when remastering the ISO onto another medium.
HDT is a hardware detection/info tool. It will show information about your hardware,
including PCI devices. It will also show the names of the kernel modules that will
support your devices.
* squashfs images that will be part of read-only branchs for union mount in /
are mounted on /ro_branch/{image_name} instead of /tmpfs/mnt/{image_name}
(and avoid empty dirs on live env under /mnt)
* tmpfs that will be part of read-write branch for union mount in /
is mounted on /rw_branch instead of /tmpfs
* tmpfs that is for store *.sqfs images when copytoram=y, is mounted on
/copytoram instead of /tmpfs.sqfs
* tmpfs_size= parameter renamed to rw_branch_size=
* tmpfs_sqfs_size= parameter renamed to copytoram_size=
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
First install {base} group, then install rest of packages listed
at in packages file.
In this way, ensure a fully base system installed first,
avoinding errors from install scriptlets of rest of packages.
(currently there is no issue with packages listed on packages files,
but if some add more packages to customize the iso will see errors)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
dialog is no longer in the base group, but it needs to be included on
the CD for AIF.
Signed-off-by: Christopher Brannon <cmbrannon79@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
This script can be part of the wiki, or in another package/project.
(See Dieter comment at FS#12619)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Register a mount_hook if booted via PXE. This allows to do all needed
steps before and after calling archiso_mount_handler.
* umount and disconnect network device if copytoram=y
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
The purpose of this script is to setup a basic PXE server enviroment
from Arch Linux live-media. Only need to setup an ip address in the
machine and launch it. Booting all machines conected to the network
via PXE will boot Arch Linux Live media :)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
nbd (network block device utilities) package is required.
This package is in AUR at this moment.
http://aur.archlinux.org/packages.php?ID=9691
Also added dnsmasq pkg, so the live-medium, appart of support booting from PXE
also add the capability to acts as server for PXE & NBD.
This is a dirty script to ilustrate how to launch server:
---- Cut here ----
IP=$1
ISO=$2
ifconfig eth0 ${IP}
dnsmasq \
--enable-tftp \
--tftp-root=/bootmnt/boot \
--dhcp-boot=/pxelinux.0,"${IP}" \
--dhcp-range=${IP%.*}.2,${IP%.*}.254,86400
nbd-server 9040 ${ISO} -r
---- Cut here ----
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Takes the advantage of already symlinks created on /dev/disk/by-label/ by
60-persistent-storage.rules add by udev hook.
Tested on:
* Real machine as CD-ROM and USB key drive.
* KVM as CD-ROM and DISK (for both modes, in combination with IDE and SCSI)
* VirtualBox as IDE CD-ROM.
IMPORTANT note: Since isohybrid is a hack, if more partitions are added to
USB key drive, filesystem on these partitions MUST have LABEL, otherwise
USB key will fail to boot. Anyway there is an option archisodevice=,
to force and specific device where live-media reside.
(Maybe isohybrid will change the hack method used in a future)
More info at:
http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000890.htmlhttp://mailman.archlinux.org/pipermail/arch-releng/2010-March/000913.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Fix file permissions, since GIT does not manage perms other than 755 and 644.
Also this can be used to adjusts owner:group.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
To make compatible with disablehooks= param. Since "hook_archiso-early"
is not a valid variable name.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
