UTC is a more reasonable default than Canada/Pacific
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Makes an efiboot.img (FAT16) for "El Torito" (additional).
Under an EFI-system, implies that this .ISO works only if is used
as "CD-ROM/DVD-ROM" not in ISO-HYBRID-MBR mode.
If you want, an EFI-ready USB-key, just unpack this "<ISO>/EFI/efiboot.img" (FAT16) to
"<USB-key-FAT-formatted>/EFI" then copy "<ISO>/arch" and setup the filesystem label.
An aditional EFI shell is provided with an startup script for automatic booting
until EFI_STUB supports "linux.conf" to pass boot parms to kernel.
Anyway I think that is a good idea to keep this shell, so can customize boot parms,
or for doing other tasks on systems without an EFI-shell.
RFCv1: Initial efiboot.img build with vmlinuz.efi (Linux with EFI_STUB enabled)
and archiso.img (initramfs).
RFCv2: Use an startup.nsh with EFI-Shell 2.0 (generated from build.sh) for automatic boot.
RFCv3: Use and older EFI-Shell 1.0 instead of 2.0, since not all UEFI-systems
are compatible with 2.3+ specs.
RFCv4: The script "startup.nsh" improved by Keshav P R, using a for-loop
(see notes below from original commit), now that has more than 1-line,
I moved it to an independent file and is parsed by build.sh.
----
About startup.nsh:
Author: Keshav P R <the.ridikulus.rat@gmail.com>
Date: Thu Apr 5 10:33:20 2012 +0530
[configs/releng] Search in all existing UEFI FS mountpoints for archiso efistub kernel file
There is no guarantee that the efistub kernel will always be in fs0:
(similar to the case inside linux OS where the sda, sdb confusion exists,
hence the need for UUIDs), especially when USB (instead os CD/ISO) is
used for booting.
Hence loop through all possible fs mountpoints (in UEFI) in startup.nsh
and try to launch the first mountpoint that contains the archiso files.
Cd's into the fs%m:\EFI\archiso directory also may remove future issues
with efistub's linux.conf where the efistub might have problems
identifying the directory from which the kernel was launched.
Also add an helpful echo message showing the user the UEFI PATH to the
archiso kernel file being launched by startup.nsh .
Hopefully this should work in both CD and USB. Tested in Tianocore
UDK/EDK2 DuetPkg X64 UEFI 2.3.1 firmware with EdkShellBinPkg's Shell.
----
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This mode allow to build all 6 ISOs in just one step if build type is <all>.
So "build.sh build all all" -> (single-i686, single-x86_64, dual) X (netinstall, core).
Note that the <purge> command is executed between each build step to save space,
so do not use this mode if you want to keep all temporal files in work_dir.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Use new -d option in mkarchroot (mount /dev as devtmpfs), then avoid
mknod for loop dev. (Needs devtools >= 20120305)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This was the first implementation that downloads the complete ISO,
but now we have the posibility of download only needed *.sfs files.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This was useful to me during development of dm-snapshot support
to create very quickly isos without wating for SquashFS compression.
Is time to remove this, I think the is no practical usage,
and make the code a bit more simple.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Now we have more than one PXE boot methods.
* archiso_ndb_srv= accepts special ${pxeserver} parameter like in others PXE hooks.
* This allows to setup network from initramfs without forcing using a special PXE hook.
* Update README
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
It add support for using *.sfs images via NFS.
It must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New boot parameters:
archiso_nfs_srv=IP:/path
Set the NFS IP and path. Accepts ${pxeserver} as IP.
archiso_nfs_opt= Sets NFS mount opts (comma separated)
Defaults to:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
timeo = 7
retrans = 3
acregmin = 3
acregmax = 60
acdirmin = 30
acdirmax = 60
flags = hard, nointr, noposix, cto, ac
:: Running Hook [archiso_pxe_common]
IP-Config: eth0 hardware address 52:54:00:12:34:57 mtu 1500
IP-Config: eth0 guessed broadcast address 192.168.0.255
IP-Config: eth0 guessed nameserver address 192.168.0.218
IP-Config: eth0 complete (from 192.168.0.218):
address: 192.168.0.90 broadcast: 192.168.0.255 netmask: 255.255.255.0
gateway: 192.168.0.218 dns0 : 192.168.0.218 dns1 : 0.0.0.0
rootserver: 192.168.0.218 rootpath:
filename :
:: Running Hook [archiso_pxe_nbd]
:: Running Hook [archiso_pxe_curl]
:: Running Hook [archiso_pxe_nfs]
:: Mounting '192.168.0.77:/mnt/iso'
...
192.168.0.77:/mnt/iso/ on /run/archiso/bootmnt type nfs (rw,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,hard,nolock,proto=tcp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.77)
...
My /etc/exports
/mnt/iso 192.168.0.90(ro,no_subtree_check,no_root_squash)
Its add support for downloading the ISO image via HTTP/FTP with curl or download *.sfs files.
The files are downloaded on /run/archiso/curlspace (tmpfs) and setup a loop dev from it
(like in archiso_loop_mnt) in the ISO case, or just do a bind mount to
/run/archiso/bootmnt in the other case.
This hook must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New bootparm:
* archiso_curl_url=(first form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/archlinux.iso (absolute form)
Use an absolute URL. Fetch the entire ISO
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/archlinux.iso (relative form)
Use the as IP the same server where PXE reside. Fetch the entire ISO
* archiso_curl_url=(second form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/unpacked (absolute form)
Use an absolute URL. Where unpacked (an example name) is a directory where
${archisobasedir} ("arch" by default) is located with all *.sfs.
This fetch only needed files.
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/unpacked (relative form)
Use the as IP the same server where PXE reside. Where unpacked (an example name)
is a directory where ${archisobasedir} ("arch" by default)
is located with all *.sfs. This fetch only needed files.
* curlspace_size= Set a size for a tmpfs filesystem where files are downloaded.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
One hook only setup the network device (archiso_pxe_common) the other
setup the NBD client (archiso_pxe_nbd).
New bootparam:
archiso_pxe_srv=IP
Allow to set an IP different from the PXE server.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Support img_label=
* Allow use img_dev= as cow_device=
* Use new function _mnt_dev() from archiso.
* Check for error while setting loopback device.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
This allow to take control again of these mountpoints outside initramfs.
(i.e: on deinitramfs stage at shutdown for unmount it)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Add some options to control where all COW files will be located.
Until this moment all files are located in a tmpfs filesystem.
Now is posible to set a device via a filesystem label or device node
plus a directory, where all these files will be stored.
All dm-snapshot devices will be persistent by default,
but this can be changed if wanted.
Take care, a filesystem that does not support sparse files maybe
is not the best choice for COW files, because they are created with
the same size (is apparent) like the read-only device (the image.fs inside .sfs).
Of course sooner or later, depending on use, these files actually end up
being as big as the read-only device.
KNOW-ISSUE: On shutdown in step "Unmounting Filesystems" will [FAIL],
all filesystem except $cow_device, will be unmounted/remounted-ro.
For this reason this change needs an archiso_shutdown hook, thats
unmount all block devices used by archiso. (Work in progress)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Preparing terrain for UEFI support.
* Also make isohybrid hack in one step.
* Removed UDF layer, since xorriso does not support it.
* Removed unsupported options by xorriso (-uid/-gid/-allow-limited-size)
* Removed option already default in xorriso (-input-charset utf-8)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
usage ./build.sh [options] command <command options>
General options:
-N <iso_name> Set an iso filename (prefix)
Default: archlinux
-V <iso_version> Set an iso version (in filename)
Default: 2011.08.18
-L <iso_label> Set an iso label (disk label)
Default: ARCH_201108
-D <install_dir> Set an install_dir (directory inside iso)
Default: arch
-w <work_dir> Set the working directory
Default: work
-o <out_dir> Set the output directory
Default: out
-v Enable verbose output
-h This help message
Commands:
build <mode> <type>
Build selected .iso by <mode> and <type>
purge <mode>
Clean working directory except iso/ directory of build <mode>
clean <mode>
Clean working directory and .iso file in output directory of build <mode>
Command options:
<mode> Valid values 'single' or 'dual'
<type> Valid values 'netinstall', 'core' or 'all'
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
purge_single command can be usefull to save space during build. It removes
all files in working directory except "iso/" and *.iso.
Workflow can be:
(32) ./build.sh all_iso_single -> i686 *.iso are ready.
(32) ./build.sh purge_single -> safe cleanup.
(64) ./build.sh all_iso_single -> x86_64 *.iso are ready.
(64) ./build.sh purge_single -> safe cleanup.
(any) ./build.sh all_iso_dual -> dual *.iso are ready.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Default value is "arch". This implies that all device mapper node
for snapshot devices will be for example: arch_root-image.
This helps AIF to hidden these devices from "Device Configuration".
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Use device mapper + snapshot module, instead union layer filesystem.
* A block-level approach vs vfs-level.
* No more unofficial (Linux) things.
* More memory is needed.
* Refactor mkarchiso.
* Refactor hooks/archiso.
* Fix install/archiso_pxe_nbd
(due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules())
[Thanks Dave for the improved workaround]
* New configs/releng to build official images.
* Works with a Bash script instead of Makefile.
(better control and easy to maintain)
* Remove configs/syslinux-iso.
* Remove archiso2dual script. Integrate functionality in configs/releng.
* New configs/baseline to build the most basic live medium or use as template.
* New README (draft). [Thanks Dieter for fixing english grammar]
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
* Register a mount_hook if booted via PXE. This allows to do all needed
steps before and after calling archiso_mount_handler.
* umount and disconnect network device if copytoram=y
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Some rudimentary documentation that mkarchiso -h doesn't
quite cover. Poor humor comes free with the deal.
Signed-off-by: Simo Leone <simo@archlinux.org>
