archiso/mkarchiso:
Change the help output to reflect that the `-g` option is generically signing a rootfs (which may be e.g. squashfs or
erofs).
Change the output of `_mksignature()` to be more generic, as it signs any type of understood rootfs image (which may be
e.g. squashfs or erofs).
archiso/mkarchiso:
Force the file extension in use for the PGP signatures of the rootfs to always be .sig.
When gnupg's 'armor' configuration option is used, the output otherwise defaults to using .asc.
As the verification hook in mkinitcpio-archiso expects the .sig file extension, verifying the rootfs will fail in that
scenario.
mkarchiso creates "${airootfs_dir}/etc/machine-id" by using output redirection. If this file is an existing symlink, then the printf output would be written to the symlink target. It can be a big issue in case the symlink resolves to a path outside ${airootfs_dir}.
Fixes#121.
This provides the ISO version information in the os-release file.
* IMAGE_ID is set to the value of $iso_name.
* IMAGE_VERSION is set to the value of $iso_version.
Implements #116.
Some hardware, like Lenovo Thinkpad T420, will not BIOS boot if the disk has a valid GPT.
See https://bbs.archlinux.org/viewtopic.php?id=264096 .
Instead of a valid GPT, change to a valid MBR and invalid GPT similar to what was used before 729d16b48c. That layout, despite having crazy partition tables, boots everywhere.
The difference is that -append_partition is still kept and specified before -isohybrid-gpt-basdat. Thus the appended partition will be listed as EFI system partition in MBR and as Microsoft basic partition in the invalid GPT.
Fixes#102.
EROFS, like Squashfs, is a read-only file system. It can be used to store airootfs in an image file.
Its advantage is the support for POSIX ACLs. EROFS downside is that currently it only supports LZ4 compression (LZMA support is not yet fully implemented).
A difference from Squashfs is that, EROFS stores change time (ctime) not modification time (mtime). The reverse is true for Squashfs.
Implements https://gitlab.archlinux.org/archlinux/archiso/-/issues/59
Booting via PXE we want to keep our DNS configuration. So remove
/etc/resolv.conf in new root before copying the current file.
Without this systemd-resolved fallback nameservers are used and we see an
error message when the root ships a symbolic link to systemd-resolved's
stub-resolv.conf:
cp: not writing through dangling symlink '/new_root/etc/resolv.conf'
To date the iso version was used for iso volume information and iso file name.
In my custom builds I do use it a lot more:
* Inside the root fs: The system knows about its own version. I use this to:
-> report the version to a server (poor man's inventory)
-> let the system update itself
* On the iso fs: The files are served via rsync, running systems transfer
version file first to check for available update.
* A grub environment file on the iso fs: Booting the iso from grub allows
to create cow directory per version:
loopback loop archlinux.iso
load_env -f (loop)/arch/grubenv
linux (loop)/arch/boot/x86_64/vmlinuz-linux ... \
cow_directory=archlinux/${VERSION} ...
So let's just create these files.
archiso/mkarchiso:
Make sure to always compare absolute paths in `_make_custom_airootfs()` (as `realpath` is used).
Remove `echo` calls that prevent the setting of actual file ownerships and modes.
configs/releng/profiledef.sh:
Set file mode of /root/.automated_script.sh to 755.
Fixes#82
profiledef.sh can now contain an associative array called file_permissions which can be used to set custom ownership and mode of custom airootfs files. The array's keys contain the path and the value is a colon separated list of owner UID, owner GID and access mode.
For example:
file_permissions=(
["/etc/shadow"]="0:0:400"
)
This means that mkarchiso now copies airootfs files (and directores) without permissions and anything that should be owned by a user other than root and/or if the mode should be something other than 644 for files and 755 for directories must to be listed in ${file_permission[@]} in profiledef.sh.
Fixes https://gitlab.archlinux.org/archlinux/archiso/-/issues/61 .
archiso/mkarchiso:
Guard the call to `_mksignature()` in `_prepare_airootfs_image()` by an if statement.
Using the `&&` logic leads to `_prepare_airootfs_image()` evaluating to false if `$gpg_key` is not set.
Add `_msg_info()` calls to `_set_override()` which prevent the function from evaluating to false if no override is
being done. Additionally this is great for debugging purposes.
Add `_msg_info()` calls to `_read_profile()` (which is great for debugging purposes).
Fixes#81
- Remove remnants of the now removed legacy commands.
- Improve readability by getting rid of some "if" statements when performing string comparisons.
- Rename functions to make their purpose more clear.
- Move some conditions from functions to their invocations.
configs/{baseline,releng}/build.sh:
Remove `build.sh` scripts. They were deprecated with v47.
archiso/mkarchiso:
Remove all `build.sh` related functionality (i.e. `command_pkglist()`, `command_iso()`, `command_prepare()`,
`command_install()`, `command_init()`, `command_run()`).
Rename `command_build_profile()` to `_build_profile()` to be more in line with the style of the other function naming.
Change `_show_config()` to only print info about the profile and make no more use of parameters.
Remove all help output related to legacy `build.sh` commands.
Fixes#51
archiso/mkarchiso:
Change `_pacman()` to use the *modified* pacman.conf from the work_dir, instead of using the *unmodified* pacman.conf from
the profile.
Change `_make_pacman_conf()` to compare the system's and the profile's CacheDir setting and use the profile's CacheDir
setting only if it's not the default and not the same as the system's.
Always set the HookDir to the airootfs' override directory, so that no hooks from the host system are being run.
Remove DBPath, LogFile and RootDir settings from the work_dir pacman.conf as they are otherwise referring to the host
system, **even if** pacman is being called with the `-r` flag.
Fix a typo in _make_custom_airootfs().
README.profile.rst:
Add information about the pacman.conf in a profile and how configuration options behave, when used by mkarchiso.
Fixes#73Fixes#74
Support bios.syslinux.eltorito boot mode without bios.syslinux.mbr.
bios.syslinux.mbr does not work without bios.syslinux.eltorito because -isohybrid-mbr requires the El Torito boot image.
Support uefi-x64.systemd-boot.esp boot mode without uefi-x64.systemd-boot.eltorito and vice versa.
If uefi-x64.systemd-boot.eltorito is used without uefi-x64.systemd-boot.esp, the El Torito boot image will be placed in the ISO 9660 file system as before.
Note that an ISO created with only uefi-x64.systemd-boot.eltorito will still be bootable as a "hard disk" on OVMF. OVMF will boot the El Torito image.
This change has the following effect on the partition tables:
- *.eltorito options add El Torito boot catalog entries. MBR and GPT are not affected.
- uefi-x64.systemd-boot.esp creates a protective MBR partition table and a GPT table that includes a Linux filesystem data partition for the ISO 9660 volume, an EFI system partition and a Microsoft basic data partition that maps the 300 KiB padding added by xorriso.
- bios.syslinux.mbr (without uefi-x64.systemd-boot.esp): adds a MBR partition table and maps the ISO 9660 volume as a partition of type 0x83. No GPT is produced.
- bios.syslinux.mbr (with uefi-x64.systemd-boot.esp): adds an second partition in the MBR (after 0xEE) starting from sector 0 to sector 1 with type 0 and marks it as bootable. This violates the GPT specification, but allows some systems to succesfully boot in BIOS mode from GPT.
Fixes https://gitlab.archlinux.org/archlinux/archiso/-/issues/49
archiso/mkarchiso:
The bash arithmethics in _make_boot_uefi-x64.systemd-boot.esp() introduced rounding issues, that can lead to
insufficient FAT image size for the files.
Conversion functions for awk now replace the bash arithmetics and additionally a ceil() function rounds the calculated
size up to the next full MiB.
Add an info message about the size of the created FAT image.
Fixes#70
archiso/mkarchiso:
Change the way _show_config() displays information about the build environment, as displaying a profile directory as a
legacy command to mkarchiso is confusing.
The function now prints a deprecation message if '$command_name' is not a directory (i.e. not a profile).
Remove 'command_' prefix from help output for legacy commands (the prefix is only in use for internal functions).
Relates to !69Fixes#60
Use du to count the file size of the kernel(s), initramfs images and boot loader (and its configuration).
This allows to compress initramfs with something other than xz, or have more than one kernel installed.
Fixes https://gitlab.archlinux.org/archlinux/archiso/-/issues/62 .
All kernels and initramfs images from airootfs are copied to ${install_dir}/boot/ on both ISO 9660 and FAT.
This allows providing multiple kernels. The kernel package needs to be added to packages.x86_64 and the boot loader configuration files created/adjusted appropriately.
Support all possible microcode initrd file names.
Copy /etc/skel/ only for users with UID in range 1000–60000.
Correct user home directory permission after copying files.
Fixes all /etc/skel issues from https://bugs.archlinux.org/task/67729 .
- mtools supports SOURCE_DATE_EPOCH.
- The image file is operated on directly instead of mounting the file system. This is a prerequisite to limit the commands that run with root privileges. Related to https://gitlab.archlinux.org/archlinux/archiso/-/issues/40 .
- Add a reminder comment to not get rid of the dosfstools dependency, since a mformat made FAT image can fail to boot on some systems.
**archiso/mkarchiso**:
In d90184a the unbound variable `override_install_dir` was introduced by accident.
It is required to be set to empty string to provide override functionality for `install_dir`.
Fixes#57
**archiso/mkarchiso**:
Change all override option parameters (i.e. `-A`, `-C`, `-D`, `-L`, `-P` and `-g`) to not directly override the global
variable they are tied to, but instead using an `override_` prefixed variable.
Add `_set_overrides()` to use `override_` prefixed variables (if set) to override those without a prefix.
Remove `-B` (a profile directory) from the list of parameters. The profile directory is now provided as separate
non-option parameter.
Add a call to `_read_profile()`, `_set_overrides()` and `command_build_profile()` to the fallthrough option of the
switch-case checking `command_name` - a non-option parameter to mkarchiso. This effectively provides the possibility to
set the profile directory using a non-option parameter, while still maintaining compatibility to legacy named arguments
used in the configs' `build.sh` scripts.
Extend the warning in regards to legacy `build.sh` based commands to mkarchiso by providing an EOL with archiso v49.
Change the help output to reflect the changes and further elaborate on the legacy commands used by `build.sh` scripts.
Change help output to be ordered alphabetically.
Add help output for `-r` and `-g` options.
Call `_set_overrides()` for legacy commands that accept one or more of the overriden options (i.e. `command_init`,
`command_install`, `command_prepare` and `command_iso`).
Various style fixes.
**configs/{baseline,releng}/build.sh**:
Change call to mkarchiso to use the profile's directory as a named argument instead of an option-argument.
**README.rst**:
Fix documentation on how to call mkarchiso with a profile directory.
Fix wording and ordering of option arguments for run_archiso documentation.
Fixes#52
Fixes to issues introduced in https://gitlab.archlinux.org/archlinux/archiso/-/merge_requests/59 :
- _make_boot_on_fat(): copy initramfs from "${airootfs_dir}/boot/" not "${isofs_dir}/". Otherwise UEFI-only ISOs cannot be built.
Some general fixes:
- Replace mkdir with install. Unlike mkdir, install does not complain when the target exists.
- Reduce excess newlines produced by messages.
- Ensure FAT image gets unmounted in case the script is interrupted.
- Create the ext4 image with mkfs.ext4 instead of truncate.
- Do not rely on user and group names for chown commands. Use numeric UID and GID instead.
- Minimize the times stderr is redirected to /dev/null.
- Add missing '?' to getopts.
- Standardize function definitions by removing spaces between the function name and () .
