Initial import

git-svn-id: http://phraktured.net/archiso@1 00a9fe69-e71b-0410-bb23-df0e5024db41

archlive_hook

@@ -0,0 +1,64 @@
+# vim: set ft=sh:
+run_hook ()
+{
+#Big Fat TODO... we need to add possible boot 'cheatcodes'
+#  as is common in most livecds.  However, most of these can be handled
+#  in real userspace (early userspace only needs to load the squashfs
+#  image.  That is _all_.  Others will be handled in a custom rc.local/rc.conf
+
+    #This is going to get brutal...
+
+    if [ "x${ramdisk_size}" = "x" ]; then
+        ramdisk_size="75%"
+    fi
+    msg -n ":: Mounting tmpfs, size=${ramdisk_size}..."
+	mount -t tmpfs -o "size=${ramdisk_size}" tmpfs /tmpfs
+    mkdir /tmpfs/bootcd
+    msg "done."
+
+    squashfound=0
+    msg -n ":: Scanning for boot cdrom device..."
+    for cdrom in /dev/cd/*; do
+        if mount -r -t iso9660 "${cdrom}" /tmpfs/bootcd >/dev/null 2>&1; then
+            if [ -e /tmpfs/bootcd/archlive.sqfs ]; then
+                squashfound=1
+                msg "${cdrom}"
+                break
+            fi
+        fi
+        [ $squashfound -eq 0 ] && umount /tmpfs/bootcd >/dev/null 2>&1
+    done
+
+    if [ $squashfound -eq 0 ]; then
+        echo "ERROR: cannot find booted cdrom device, cannot continue..."
+        exit 1
+    fi
+
+    msg -n ":: Mounting squashfs image..."
+    /bin/modprobe -q squashfs >/dev/null 2>&1
+    mkdir -p /tmpfs/squashfs_root
+    if ! losetup /dev/loop0 /tmpfs/bootcd/archlive.sqfs; then
+        echo "ERROR: Cannot mount loop device /dev/loop0...aborting"
+        exit 1
+    fi
+    mount -r -t squashfs /dev/loop0 /tmpfs/squashfs_root
+    #mount.full -r -t squashfs -o loop /tmpfs/bootcd/squashfs_image /tmpfs/squashfs_root
+    msg "done."
+
+    msg -n ":: Mounting root (union) filesystem..."
+    /bin/modprobe -q unionfs >/dev/null 2>&1
+	mount -t unionfs -o dirs=/tmpfs=rw:/tmpfs/squashfs_root=ro,debug=0 none /real_root
+    msg "done."
+
+    if [ -d /proc/sus/dev/cdrom ]; then
+        echo 0 > /proc/sys/dev/cdrom/lock
+        echo 1 > /proc/sys/dev/cdrom/autoeject
+    fi
+
+    msg ":: Stopping udevd"
+    udevpid=$(/bin/minips -C udevd -o pid=)
+    [ "x${udevpid}" != "x" ] && /bin/kill -9 $udevpid
+    #Yep, we're bailing out here.  We don't need kinit.
+    msg ":: Passing control to Archlinux Initscripts..."
+    exec /bin/run-init -c /dev/console /real_root /sbin/init ${CMDLINE}
+}

archlive_install

@@ -0,0 +1,11 @@
+# vim: set ft=sh:
+install ()
+{
+    MODULES="cdrom ide-cd ide-core ide-generic unionfs squashfs iso9660 $(all_modules '/kernel/fs' | grep -v "nls") "
+    BINARIES=""
+    FILES=""
+    add_binary /bin/mount /bin/mount.full
+    add_dir /real_root
+    add_dir /tmpfs
+    SCRIPT="liveiso"
+}

base.packages

@@ -0,0 +1,90 @@
+bash
+bin86
+binutils
+bzip2
+coreutils
+cpio
+cracklib
+db
+dcron
+dhcpcd
+dialog
+e2fsprogs
+ed
+elinks
+file
+filesystem
+findutils
+gawk
+gcc
+gettext
+glibc
+grep
+groff
+grub-gfx
+gzip
+initscripts
+iputils
+jfsutils
+kbd
+less
+lftp
+libpcap
+libusb
+licenses
+lilo
+lshwd
+lsof
+lzo2
+mailx
+man
+man-pages
+mktemp
+module-init-tools
+nano
+ncurses
+net-tools
+netcat
+netkit-telnet
+nmap
+openssh
+openssl
+pacman
+pam
+parted
+pciutils
+pcmciautils
+pcre
+perl
+popt
+ppp
+procinfo
+procps
+psmisc
+python
+raidtools
+readline
+reiserfsprogs
+rp-pppoe
+sed
+shadow
+squashfs
+sysfsutils
+syslog-ng
+sysvinit
+tar
+tcp_wrappers
+tcpdump
+udev
+unionfs
+unrar
+unzip
+usbutils
+util-linux
+vim
+wget
+which
+wireless_tools
+wpa_supplicant
+xfsprogs
+zlib

default-config/boot/grub/help.lst

@@ -0,0 +1,14 @@
+# Help files must be exactly 23 lines long.
+timeout 60
+default 0
+
+title Back to main menu
+configfile /boot/grub/menu.lst
+
+title HOW-TO: Boot an existing system
+cat /boot/help/bootexisting
+pause Press enter to continue...
+
+title HOW-TO: Do some other shit
+cat /boot/help/bootexisting
+pause Press enter to continue...

default-config/boot/grub/menu.lst

@@ -0,0 +1,22 @@
+
+#TODO add options + graphical stuff
+timeout 30
+default 0
+color light-blue/blue black/light-grey
+splashimage=/boot/splash.xpm.gz
+
+title  Boot ArchLive
+kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 ramdisk_size=75%
+initrd /boot/archlive.img
+
+title  Shutdown the Computer
+halt
+
+title  Reboot the Computer
+reboot
+
+title View Help...
+configfile /boot/grub/help.lst
+
+title More Options...
+configfile /boot/grub/more.lst

default-config/boot/grub/more.lst

@@ -0,0 +1,21 @@
+timeout 60
+default 0
+
+title  Boot Existing Linux Install
+root   (hd0,2)
+kernel /vmlinuz26 root=/dev/hda1 ro
+
+title  Boot Existing Windows Install
+rootnoverify (hd0,0)
+makeactive
+chainloader +1
+
+title  Install GRUB to HD0
+root  (hd0,0)
+setup (hd0)
+
+title  Run Ranish Partition Manager
+kernel /boot/ranish/part.exe
+
+title  Run memtest86+
+kernel /boot/memtest86+/memtest.bin

default-config/boot/help/bootexisting

@@ -0,0 +1,23 @@
+This is a helpfile
+
+Hopefully grub will make this happy....
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

default-config/etc/arch-release

@@ -0,0 +1 @@
+Arch Linux Live ISO 0.X (Sniklefritz)

default-config/etc/archiso/getshell

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+. /etc/archiso/functions
+shell="$(cmdline_param shell)"
+[ -n "${shell}" ] && shell="/bin/bash"
+[ ! -e "${shell}" ] && shell="/bin/sh"
+
+exec ${shell}

default-config/etc/fstab

@@ -0,0 +1,9 @@
+# 
+# /etc/fstab: static file system information
+#
+# <file system>        <dir>         <type>    <options>          <dump> <pass>
+none                   /dev/pts      devpts    defaults            0      0
+none                   /dev/shm      tmpfs     defaults            0      0
+tmpfs                  /tmp          tmpfs     defaults            0      0
+
+/dev/cdrom             /bootcd       iso9660   ro,user,noauto      0      0

default-config/etc/group

@@ -0,0 +1,19 @@
+root::0:root
+bin::1:root,bin,daemon
+daemon::2:root,bin,daemon
+`sys::3:root,bin
+adm::4:root,daemon
+tty::5:
+disk::6:root,arch
+lp::7:daemon
+mem::8:
+kmem::9:
+wheel::10:root,arch
+ftp::11:
+mail::12:
+smmsp::25:
+audio::92:arch
+optical::93:arch
+nobody::99:
+users::100:arch
+slocate:x:21:

default-config/etc/inittab

@@ -0,0 +1,16 @@
+id:4:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+c1:2345:respawn:/sbin/agetty 38400 vc/1 linux
+c2:2345:respawn:/sbin/agetty 38400 vc/2 linux
+c3:2345:respawn:/sbin/agetty 38400 vc/3 linux
+c4:2345:respawn:/sbin/agetty 38400 vc/4 linux
+c5:2345:respawn:/sbin/agetty 38400 vc/5 linux
+c6:2345:respawn:/sbin/agetty 38400 vc/6 linux
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now

default-config/etc/issue

@@ -0,0 +1,2 @@
+Arch Linux Live ISO 0.X (Snicklefritz)    (\n) (\l)
+Default user: arch

default-config/etc/pam.d/su

@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+auth		sufficient	pam_wheel.so trust use_uid
+auth		required	pam_unix.so
+account		required	pam_unix.so
+session		required	pam_unix.so

default-config/etc/passwd

@@ -0,0 +1,7 @@
+root:x:0:0:root:/root:/bin/bash
+bin:x:1:1:bin:/bin:
+daemon:x:2:2:daemon:/sbin:
+mail:x:8:12:mail:/var/spool/mail:
+ftp:x:14:11:ftp:/home/ftp:
+nobody:x:99:99:nobody:/:
+arch::1000:100::/home/arch:/bin/bash

default-config/etc/rc.conf

@@ -0,0 +1,22 @@
+#
+# /etc/rc.conf - Main Configuration for Arch Linux
+
+LOCALE="en_US.UTF-8"
+HARDWARECLOCK="UTC"
+TIMEZONE="America/Chicago"
+KEYMAP="us"
+CONSOLEFONT=
+CONSOLEMAP=
+USECOLOR="yes"
+
+MOD_AUTOLOAD="yes"
+MODULES=()
+USELVM="no"
+
+HOSTNAME="archlive"
+lo="lo 127.0.0.1"
+INTERFACES=(lo)
+ROUTES=()
+
+#TODO add more auto-daemons here, especially the live-cd specific stuff
+DAEMONS=(syslog-ng network crond)

default-config/etc/rc.d/archiso

@@ -0,0 +1,66 @@
+# vim: set ft=sh:
+cmdline_param ()
+{
+    while param do;
+        case "${param}" in
+            $1=*) echo "${param##*=}"; break ;;
+            *) continue ;;
+        esac
+    done < read /proc/cmdline
+}
+. /etc/rc.conf
+. /etc/rc.d/functions
+. /etc/archiso/functions # above goes in this file...
+
+do_mounts ()
+{
+    #iterate over all block devices
+    stat_busy "Scanning local block devices"
+    for dev in $(echo /sys/block/*/dev /sys/block/*/*/dev); do
+
+        devname="/dev/$(echo ${dev} | cut -d'/' -f3,4 | cut -d'/' -f1)"
+        mountpt="/mnt/$(basename '${devname}')"
+	    mkdir -p "${mountpt}" 2>/dev/null
+	    mount ${options} "${devname}" "${mountpt}" >/dev/null 2>&1
+
+		fstype=$(awk '{ if ($1=="${devname}") { print $3" "$4;q }}' /proc/mounts)
+		fstype="${fstype%%,*}"
+		case "${fstype%% *}" in
+            *fat*|ntfs|*dos) options="user,exec,uid=0,gid=100,umask=00070" ;;
+            *) options="users,defaults,exec" ;;
+            #TODO handle 'sync' on usb devices... 
+        esac
+
+        echo "${devname} ${mountpt} ${fstype} ${options} 0 0 #configured by archiso" >>/etc/fstab
+    done
+    stat_done
+}
+
+do_locale ()
+{
+    #copy from rc.sysinit - use cmdline_param locale (or lang ?)
+}
+
+do_swap ()
+{
+    #Archie finds a pagefile.sys for windows/dos machines... may add later
+    stat_busy "Finding existing swap partitions"
+	swapdev="$(fdisk -l 2>/dev/null | grep swap | cut -d' ' -f1)"
+    if [ -e "${swapdev}" ]; then
+        swapon ${swapdev}
+        echo "${swapdev} swap swap defaults 0 0 #configured by archiso" >>/etc/fstab
+    fi
+    stat_done
+}
+
+do_homedir ()
+{
+    stat_busy "Scanning for existing HOME directory"
+    user="$(cmdline_param homeuser)"
+    for hdir in $(find /mnt -name "home/${user}" 2>/dev/null); do
+        mkdir -p "/home/arch/"
+        # break after the first success...
+        mount --bind "${hdir}" "/home/arch/" && break
+    done
+    stat_done
+}

default-config/etc/shadow

@@ -0,0 +1,7 @@
+root::99999::::::
+bin:x:0::::::
+daemon:x:0::::::
+mail:x:0::::::
+ftp:x:0::::::
+nobody:x:0::::::
+arch::12922:0:99999:7:::

default-config/etc/sudoers

@@ -0,0 +1,2 @@
+root	ALL=(ALL) ALL
+%wheel localhost=(ALL) NOPASSWD: ALL

mkarchiso

@@ -0,0 +1,285 @@
+#!/bin/sh
+
+CONFIG="$(pwd)/mkarchiso.conf" 
+CPIOCONFIG="$(pwd)/mkinitcpio.conf"
+DEF_CONFIG_DIR="$(pwd)/default-config"
+QUIET="y"
+
+SKIP_INSTALL="n"
+SKIP_SQUASHFS="n"
+SKIP_BOOTIMG="n"
+SKIP_ISO="n"
+
+PKGDIR="."
+
+APPNAME=$(basename "${0}")
+ALL_ARGS="${@}"
+
+usage ()
+{
+    echo "usage ${APPNAME} [options] working-directory imagename.iso"
+    echo "  -c CONFIG        Use CONFIG file. default: /etc/archlive/mkarchiso.conf"
+    echo "  -i CPIO CONFIG   Use CONFIG file for mkinitcpio. default: /etc/archlive/mkinitcpio.conf"
+    echo "  -s a,b,c         Skip creation section.  Valid sections are:"
+    echo "                      install : This section installs all packages."
+    echo "                      squashfs: This section creates a squashfs root image"
+    echo "                      bootimg : This section creates a boot image."
+    echo "                      iso     : This section builds the final iso."
+    echo "  -v               Verbose output. Default: no"
+    echo "  -h               This message."
+    exit 1
+}
+
+skipopts ()
+{
+    for i in $@; do
+        case $i in
+            install)  SKIP_INSTALL="y" ;;
+            squashfs) SKIP_SQUASHFS="y" ;;
+            bootimg)  SKIP_BOOTIMG="y" ;;
+            iso)      SKIP_ISO="y" ;;
+            *) echo "invalid section '$i'"; usage ;;
+        esac
+    done
+}
+
+while getopts 'c:i:n:s:pvh' arg; do
+    case "$arg" in
+        c) CONFIG="$OPTARG" ;;
+        i) CPIOCONFIG="$OPTARG" ;;
+        s) OLDIFS=$IFS; IFS=,
+           skipopts $OPTARG
+           IFS=$OLDIFS ;;
+        v) QUIET="n" ;;
+        h|?) usage ;;
+        *) echo "invalid argument '$arg'"; usage ;;
+    esac
+done
+shift $(($OPTIND - 1))
+
+if [ $# -ne 2 ]; then
+    usage
+else
+    work_dir=${1}
+    isoname=${2}
+fi
+
+if [ -e "${work_dir}" -a "${SKIP_INSTALL}" != "y" ]; then
+    echo "Working dir '${work_dir}' already exists, aborting..."
+    exit 1
+fi
+
+if [ -e "${isoname}" -a "${SKIP_ISO}" != "y" ]; then
+    echo "ISO Image '${isoname}' already exists, aborting..."
+    exit 1
+fi
+
+if [ -e "${CONFIG}" ]; then
+    source "${CONFIG}"
+else
+    echo "Config '${CONFIG}' does not exist, aborting..."
+    exit 1
+fi
+
+if [ -e "${CPIOCONFIG}" ]; then
+    source "${CPIOCONFIG}"
+else
+    echo "mkinitcpio config '${CPIOCONFIG}' does not exist, aborting..."
+    exit 1
+fi
+
+isoroot="${work_dir}/iso"
+instroot="${work_dir}/install"
+
+if [ -z $FAKEROOTKEY ]; then
+    echo "Switching to fakeroot environment"
+    fakeroot ${0} ${ALL_ARGS}
+    exit $?
+fi
+
+_kversion ()
+{
+    echo $(pacman -Ql -r "${instroot}" "${kernelpkg}" |\
+           grep "/lib/modules/[^/]*/$" |\
+           sed "s|.*/lib/modules/\([^/]*\).*/$|\1|")
+}
+
+#Work-arounds for depmod core dumps.... I guess we could just ulimit for now...
+_safepacman ()
+{
+    FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
+    if ! pacman -Sf --noconfirm -r "${instroot}" $* >/dev/null 2>&1; then
+        echo "pacman failed to install '$*', aborting..."
+        exit 1
+    fi
+    FAKEROOTKEY=$FAKEROOTSAV
+}
+safe_install_pkgfile ()
+{
+    if [ -e "${1}" ]; then
+        toinstall=""
+        echo "   Installing packages:"
+        while read pkg; do
+            #skip packages listed in IGNOREPKGS
+            echo $ignorepkgs | grep "\<$name\>" >/dev/null 2>&1 && continue
+
+            echo "    ${pkg}"
+            toinstall="${toinstall} ${pkg}"
+        done < ${1}
+        _safepacman "${toinstall}"
+    fi
+}
+
+_pacman ()
+{
+    FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
+    if ! fakechroot pacman -Sf --noconfirm -r "${instroot}" $* >/dev/null 2>&1; then
+        echo "pacman failed to install '$*', aborting..."
+        exit 1
+    fi
+    FAKEROOTKEY=$FAKEROOTSAV
+}
+
+install_pkgfile ()
+{
+    if [ -e "${1}" ]; then
+        toinstall=""
+        echo "   Installing packages:"
+        while read pkg; do
+            #skip packages listed in IGNOREPKGS
+            echo $ignorepkgs | grep "\<$name\>" >/dev/null 2>&1 && continue
+
+            echo "    ${pkg}"
+            toinstall="${toinstall} ${pkg}"
+        done < ${1}
+        _pacman "${toinstall}"
+    fi
+}
+
+if [ "${SKIP_INSTALL}" = "n" ]; then
+    mkdir -p "${isoroot}"
+    mkdir -p "${instroot}"
+
+    FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
+    if ! pacman -Sy -r "${instroot}"  2>&1 | grep -v "cannot open logfile"; then
+        echo "Error, failed to sync pacman... aborting."
+        exit 1
+    fi
+    FAKEROOTKEY=$FAKEROOTSAV
+
+    echo "Installing 'base' packages..."
+    install_pkgfile "${PKGDIR}/base.packages"
+
+    echo "Installing _required_ packages..."
+    _pacman "memtest86+ unionfs unionfs-utils usbutils libusb pciutils squashfs-tools"
+
+    echo "Installing custom packages..."
+    for fil in ${package_files}; do
+        #TODO search for file if not absolute...
+        echo " Installing packages from file '$fil'"
+        install_pkgfile "${fil}"
+    done
+    for pkg in ${additional_packages}; do
+        echo "   Installing package '${pkg}'"
+        _pacman "${pkg}"
+    done
+
+    echo "Installing kernel '${kernelpkg}'"
+    # fakechroot and depmod don't get along well.  We'll do that stuff
+    # manually...
+    # TODO: fix fakechroot instead of working around it like a jackass
+    FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
+    if ! _safepacman "${kernelpkg}" ; then
+        echo "pacman failed to install '${kernelpkg}', aborting..."
+        exit 1
+    fi
+    FAKEROOTKEY=$FAKEROOTSAV
+    kernelver=$(_kversion)
+    kernelsuffix=${kernelver##*-}
+    echo "Kernel Version ${kernelver} (${kernelsuffix}) installed - installing modules..."
+    safe_install_pkgfile "modules.${kernelsuffix}"
+
+    echo "Updating module dependancies"
+    [ "${kernelsuffix}" == "ARCH" ] && kernelsuffix=""
+    depmod -a -b "${instroot}" -v "${kernelver}" -F "${instroot}/boot/System.map26${kernelsuffix}" >/dev/null
+    find "${instroot}/boot" -name *.img -delete
+
+    echo "Applying default configuration for the Arch ISO."
+    cp -rf ${DEF_CONFIG_DIR}/* "${instroot}"
+
+    echo "Copyright (C) 2006, Arch Linux (Judd Vinet)" > "${instroot}/etc/copyright"
+
+    echo "Creating initial device nodes "
+    rm -f "${instroot}/dev/console" "${instroot}/dev/null" "${instroot}/dev/zero"
+    mknod -m 644 "${instroot}/dev/console" c 5 1
+    mknod -m 666 "${instroot}/dev/null" c 1 3
+    mknod -m 666 "${instroot}/dev/zero" c 1 5 
+
+    echo "Creating default home directory"
+    mkdir -p "${instroot}/home/arch"
+
+    # Cleanup
+    echo "Cleaning up ISO root files..."
+    find "${instroot}" -name *.pacnew -name *.pacsave -name *.pacorig -delete
+
+    kill_dirs="var/abs var/cache/man var/cache/pacman var/log/* var/mail tmp usr/include initrd"
+    for x in ${kill_dirs}; do
+        if [ -e "${instroot}/${x}" ]; then
+            rm -rf "${instroot}/${x}"
+        fi
+    done
+
+    find "${instroot}/lib" -name *.a -delete
+    find "${instroot}/usr/lib" -name *.a -delete
+
+    # this actually takes up alot of space...
+    for d in ${instroot}/var/lib/pacman/*; do
+        [ "$(basename ${d})" != "local" ] && rm -rf "${d}"
+    done
+
+    if [ -e "${instroot}/boot" ]; then
+        rm -rf "${isoroot}/boot"
+        mv "${instroot}/boot" "${isoroot}"
+    fi
+fi
+
+if [ "${SKIP_SQUASHFS}" = "n" ]; then
+    if [ -e "${isoroot}/archlive.sqfs" ]; then
+        echo -n "Removing old squashfs image..."
+        rm "${isoroot}/archlive.sqfs"
+        echo "done."
+    fi
+
+    echo -n "Creating squashfs image. This may take some time..."
+    start=$(date +%s)
+    mksquashfs "${instroot}" "${isoroot}/archlive.sqfs" -root-owned > /dev/null
+    echo "done in $(echo $start $(date +%s) | awk '{ printf "%0.2f",($2-$1)/60 }') minutes."
+fi
+
+if [ "${SKIP_BOOTIMG}" = "n" ]; then
+    kernelver=$(_kversion)
+    basedir=${instroot}
+    [ "${instroot:0:1}" != "/" ] && basedir="$(pwd)/${instroot}"
+    if ! mkinitcpio -c "${CPIOCONFIG}" -b "${basedir}" -k "${kernelver}"\
+        -g "${isoroot}/boot/archlive.img"; then
+        echo "initcpio image creation failed..."
+        exit 1
+    fi
+
+    cp ${instroot}/usr/lib/grub/i386-pc/* "${isoroot}/boot/grub"
+fi
+
+if [ "${SKIP_ISO}" = "n" ]; then
+    echo "Creating ISO image..."
+    mkisofs ${q} -r -l -b "boot/grub/stage2_eltorito" -uid 0 -gid 0 -no-emul-boot \
+        -boot-load-size 4 -boot-info-table -publisher "Arch Linux <archlinux.org>" \
+        -p "prepared by $NAME" -A "Arch Linux Live/Rescue CD" -copyright /etc/copyright \
+        -o "${isoname}" "${isoroot}"
+fi
+
+if [ "${qemu_test}" = "y" ]; then
+    echo "Testing image via qemu..."
+    qemu -boot d -kernel-kqemu -cdrom "${isoname}" ${qemuparams}
+else
+    echo "Image completed: ${isoname}"
+fi

mkarchiso.conf

@@ -0,0 +1,11 @@
+# vim: set ft=sh:
+
+kernelpkg="kernel26"
+packager_name="Archlinux User"
+
+package_files=""
+additional_packages=""
+ignorepkgs="devfsd hotplug pcmcia-cs"
+
+qemu_test="n" 
+qemuparams="" #"-vnc 1"

mkinitcpio.conf

@@ -0,0 +1,54 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES="piix ide_disk reiserfs"
+MODULES=""
+
+# BINARIES
+# This setting includes, into the CPIO image, and additional
+# binaries a given user may wish.  This is run first, so may
+# be used to override the actual binaries used in a given hook.
+# (Existing files are NOT overwritten is already added)
+# BINARIES are dependancy parsed, so you may safely ignore libraries
+BINARIES=""
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in anyway.  This is useful for config files.
+# Some users may wish to include modprobe.conf for custom module options,
+# like so:
+#    FILES="/etc/modprobe.conf"
+FILES=""
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'modload' may be used in place of 'udev', but is not recommended
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+#    This setup specifies all modules in the MODULES setting above.
+#    No raid, lvm, or encrypted root is needed.
+#    HOOKS="base"
+#
+#    This setup will autodetect all modules for your system and should
+#    work as a sane default
+#    HOOKS="base udev autodetect ide scsi sata filesystems"
+#
+#    This setup will generate a 'full' image which supports most systems.
+#    No autodetection is done.
+#    HOOKS="base udev ide scsi sata usb filesystems"
+#
+#    This setup assembles an ide raid array with an encrypted root FS.
+#    Note: See 'mkinitcpio -H raid' for more information on raid devices.
+#    HOOKS="base udev ide filesystems raid encrypt"
+#
+#    This setup loads an LVM volume group on a usb device.
+#    HOOKS="base udev usb filesystems lvm"
+HOOKS="base udev archlive ide scsi sata usb fw filesystems"

modules.ARCH

@@ -0,0 +1,9 @@
+ipw3945
+madwifi-ng
+ndiswrapper
+rt2500
+rt2x00
+squashfs
+tiacx
+unionfs
+wlan-ng26

modules.beyond

@@ -0,0 +1,7 @@
+ipw3945
+madwifi-ng
+ndiswrapper
+rt2500
+rt2x00
+tiacx
+wlan-ng26